Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8176962
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
Information Name: | Co2 laser power supply |
Published: | 2011-02-14 |
Validity: | 365 |
Specifications: | wek-co2 |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | 80W CO2 Laser Power Supply First, the main technical parameters: Input Input Voltage AC220V or AC110V (please specify when ordering) AC frequency 47 --- 440Hz Cold Surge Current ≤ 60A (AC220V input) ≤ 30A (AC110V input) Leakage current ≤ 0.7mA (AC220V input) ≤ 0.4mA (AC110V input) Output Maximum output voltage DC 30KV Maximum output current DC 28mA (depending on manufacturer of laser tube) Efficiency ≥ 91% Response ≤ 1mS (the signal is given from the switch to set the current output current up to 90% of the time) Control Interface TTL level switching control, effective level can be high ≥ 3V, Low ≤ 0.3V select Laser power adjustment 1. By the potentiometer adjustment of laser power supply output current. 2. By a PWM (amplitude TTL level) control. Pressure Input - Output, Input - Chassis: AC1500V ≤ 10mA 1 minute; output connected to negative and case Open-circuit protection Open-circuit protection with full power! (Ie, not connected load or laser tube burst open, the power to immediately stop work until the lifting of a failure to restart the power protection lifted, Fang output) to address the protection of other manufacturers supply only a short period of time is an important protection . This can completely avoid the laser tube burst damage caused by laser power, thus effectively improve the power of life. Water pressure protection Can detect or stop water flow, power protection, until the fault removed. Over-current protection 110% of maximum current Overvoltage protection Other reasons because of the external power supply, resulting in power supply output voltage is too high (≥ 30Kv, can be customized) power protection until the fault is discharged, the laser tube to prevent overpressure damage. Use of the environment Operating temperature -30 ℃ ~ +65 ℃ Relative Humidity 20 ~ 85% RH (no condensation) Cooling Type Air Good compatibility Can adapt to a number of manufacturers of 80W laser tube. Power stability, adaptability, fast response, good results Dimensions L × W × H = 240 × 208 × 100 (mm) |
Admin>>>
You are the 9044 visitor
Copyright © GuangDong ICP No. 10089450, Will Beijing Hengyuan Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 9044 visitor
Copyright © GuangDong ICP No. 10089450, Will Beijing Hengyuan Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility